
FAQ and glossary
Orbital transfer, electric propulsion and Thorus, in plain terms.
What does OSMOS X do?
OSMOS X develops Thorus, a multi-mission orbital transfer vehicle, and HPCR®, the plasma propulsion that powers it. Thorus raises satellites to their operational orbit, inspects objects in orbit and extends the life of satellites already in service.
What is an orbital transfer vehicle?
A spacecraft that moves other satellites from one orbit to another. A launcher releases a satellite in a first orbit; the orbital transfer vehicle takes it from there to the orbit where it will work. Read our guide.
What is HPCR®?
HPCR® stands for High Power Cyclotron Resonance. It is an electric propulsion technology developed by OSMOS X: a gas is ionised by electromagnetic waves, held by magnetic fields and ejected as a plasma jet. No electrode touches the plasma. HPCR® builds on thirty-five years of research at CNRS ICARE.
How does Thorus take a satellite from LEO to GEO?
Thorus meets the satellite after separation from the launcher, secures it, then raises the orbit progressively along a spiral trajectory with its HPCR® thruster. It releases the satellite on its operational orbit and moves on to its next mission.
How long does a transfer from LEO to GEO take?
About three months with Thorus. Conventional electric propulsion typically needs many months for the same transfer, and chemical propulsion needs much more propellant.
Does plasma propulsion replace chemical propulsion?
No. The two complement each other. Chemical propulsion lifts satellites out of the atmosphere on board launchers. Plasma propulsion takes over in orbit, where its propellant economy makes long transfers and repeated missions possible.
When will Thorus be operational?
A reduced-scale HPCR® thruster flies in 2027 on a demonstration mission with SpaceLocker. Commercial operations of Thorus are planned for around 2030.
Can Thorus remove debris or deorbit satellites?
End-of-life deorbiting and debris removal are planned as future capabilities. The TAC and ALBATOR research programmes, both coordinated by OSMOS X, prepare the technologies they need: capture without a docking interface, and contactless interaction using an ion beam.
Who are OSMOS X clients?
Satellite operators, satellite manufacturers, launch providers, space agencies and defence organisations, in Europe and worldwide.
Where is OSMOS X based?
The head office, laboratory and propulsion R&D are in Bruz, near Rennes, in Brittany. The orbital services hub is in Toulouse.
How can we work together?
Use the mission form for a first assessment, or the contact page for partnerships, institutional programmes, press and careers.
Terms used on this site
- LEO
- Low Earth orbit, roughly 400 to 2,000 km above the Earth. Where most launchers release satellites.
- MEO
- Medium Earth orbit, between LEO and GEO. Used by navigation constellations such as Galileo.
- GEO
- Geostationary orbit, 35,786 km above the equator. A satellite there turns with the Earth and stays over the same point.
- GTO
- Geostationary transfer orbit. An elliptical orbit used by launchers to send satellites towards GEO.
- Orbit raising
- Moving a satellite from a lower orbit to a higher one, for example from LEO to GEO.
- Station-keeping
- The small manoeuvres a satellite makes to stay at its assigned position. They consume propellant over the whole mission.
- Specific impulse (Isp)
- A measure of propellant efficiency, in seconds. The higher it is, the less propellant a manoeuvre needs.
- Delta-v
- The change in velocity a manoeuvre requires. Moving from LEO to GEO takes a large delta-v.
- GNC
- Guidance, navigation and control: the onboard systems that steer a spacecraft.
- Rendezvous and proximity operations
- Bringing two spacecraft close together in orbit, safely, for inspection, docking or capture.
- SSA
- Space situational awareness: knowing which objects are in orbit, where they are and what they do.
- Flight heritage
- The record of a technology having flown in space. Customers usually ask for it before buying.
- PDR and CDR
- Preliminary and Critical Design Reviews, the formal milestones of a space programme before manufacturing.
- Frequency filing
- The right, registered with the ITU, to use radio frequencies from a given orbital position.

Let's talk about your mission.
Tell us about the satellite, the orbit it needs and your timeline. Our mission team comes back to you with a first assessment.